
Homogenizer
FBF7045
Weight | kg | 2.410 - 2.550 |
Dimensions: (LxDxH) | cm | 150 x 210 x 150 |
Engine | kW | 45 |
Pumping pistons | Nr. | 3 |
Water consumption | l/h | 90 - 120 |
Functional features | ||
Operating pressure | Capacity | |
bar | from (l/h) | to (l/h) |
100 | 12.000 | 16.000 |
130 | 10.500 | 16.000 |
150 | 9.500 | 15.500 |
180 | 8.000 | 12.000 |
200 | 7.500 | 12.000 |
230 | 6.200 | 10.000 |
250 | 5.800 | 9.500 |
300 | 5.000 | 8.000 |
Compression head and Homogenizing valve
- Compression head manufactured from a single block of high quality stainless steel, with a 5 year guarantee against cracking and defects
- Each valve assembly is housed inside an individually inspected AISI 316 stainless steel block
- Pumping Pistons manufactured with special hard wearing coating and double guides
- Valve group assemblies have replaceable seats and hemispherical valve shutters, ideal for processing a wide range of products
- Homogenizing valves designed for efficient use of energy, with high stability and alignment of the moving parts (impact head). The FBF hydrodynamic design ensures vibration free homogenization
Motorization
- Pump body made in thick walled premium grade high-resistance cast iron, engineered to withstand heavy loads and cancel out vibration. Reduction gear integrated into the pump body
- Crankshaft in special steel (heat treated and ultrasound scanned), supported by 5 robust roller bearings, with bronze bearings on the crankpins only
- Force fed lubrication with a special oil level sensor, a fine filter to collect impurities and a single oil lubrication system for both the pump body and the reduction gears. An alarm indicates high oil temperature
- 3 phase, 4 pole, AC electric drive motor
- Power Transmission using a ’V’’ belt with automatic tensioning
Maintenance kit
- Initial set of spare parts supplied with the machine include the following: full set of gaskets, a set of springs for valves and a complete safety valve set
- Set of tools for ordinary maintenance
- Lubrication oil (pump body and gearbox)
- Instruction and maintenance manuals (2 copies + CD ROM)
Standard options
- 2nd stage homogenizing valve
- Digital pressure transducers
- Electrical Controls - Fixed Capacity: An internal electrical board; Variable Capacity: separate stainless steel cabinet for local installation
- Aseptic Version with “sterility barriers” traced with steam condensate
- Pulsation dampeners on product inlet and/or outlet connections
- Automatic disconnection of the homogenizing pressure if the inlet pressure falls below a safe level, by means of a pressure gauge with alarm contacts fitted to the product inlet connection to the machine
- Automatic homogenization pressure controller
* Technical specifications are not mandatory and are subject to change without notice