Weight lbs 2,645 – 2,799
Dimensions: (LxDxH) in 47.24 x 61.02 x 51.18
Engine kW 30
Pumping pistons Nr. 3
Water consumption gph 23.77 – 31.70
Functional features
Operating pressure Capacity
psi from (gph) to (gph)
1,450 - -
1,885 1,241.61 1,585.03
2,175 1,109.52 1,585.03
2,610 977.44 1,320.86
2,900 845.35 1,188.77
3,335 713.26 1,056.69
3,625 581.18 924.60
4,351 581.18 792.52
Compression head and Homogenizing valve
  • The Compression head is manufactured from a single block of high quality stainless steel, of a special type, forged and checked with ultrasounds, with a 5 year guarantee against cracking and defects
  • Each valve assembly is housed within an individually inspected special AISI 316 stainless steel block
  • Pumping Pistons manufactured with a rear cooling chamber, a double guide to keep a perfect alignment, and a special “Diamond Like Carbon” plating (as a standard)
  • Valve group assemblies have replaceable seats and hemispherical valve shutters, ideal for processing a very wide range of products
  • Homogenizing valves designed to provide efficient use of energy, with high stability and alignment of the moving parts (impact head) due to the hydrodynamic assembly, which ensures a vibration free homogenization
  • Safety valve, in sanitary execution, of spring type with replaceable shutter and seat
  • The Pump body is made from a thick walled premium grade high-resistance cast iron, engineered to withstand heavy loads and cancel out vibration
  • The crankshaft is made from a special forged steel, machined from a solid piece, ”multi-step” heat treatments, superfinishing of the goosenecks and complete nitriding, is checked using ultrasounds. The crankshaft is supported by 5 robust roller bearings (with bronze bearings used only on the crank pins)
  • Power transmission with double reduction stage: “V” belts/pulleys, with semi–automatic tensioning system, with two helicoidal gears within the pump body (slow gear coupled directly on the crankshaft).
  • Lubricating plant of pressurized type with the level of the oil detected by a proper sensor, cooling of the oil by a tubular heatexchanger, an alarm for irregular pressure, an alarm for high temperature, and driven filtering of any possible impurities. For the best thermal balance/dissipating all transmission components are immersed in an oil bath
  • 3 phase, 4 pole, AC electric drive motor of leading Company
  • The frame is constructed from a square-section carbonated steel pipe coated in a powder painting , and supplied with dismountable stainless steel panels with satin finish
Maintenance kit
  • Initial set of spare parts supplied with the machine include the following: full set of gaskets, a set of springs for valves and a complete safety valve set
  • Set of tools for ordinary maintenance
  • Lubrication oil
  • Instruction and maintenance manuals (2 copies + CD ROM)
Standard options
  • 2nd stage homogenizing valve controlled by a special oil-pneumatic system
  • Digital pressure transducers and analogue gauges with 4-20 ma output
  • Fixed Capacity (remote stainless steel panel, with soft-starter)
  • Variable Capacity (remote stainless steel panel)
  • Aseptic Version with “sterility barriers” traced with steam condensate created by an integrated plant
  • Pulsation dampeners on product inlet and/or outlet connections, for special aseptic version as well
  • Pressure gauge with alarm contacts for the automatic cut-off of the homogenizing pressure, complete with timing device to manage the start/stop of the homogenizing valves
  • Automatic homogenization pressure controller

* Technical specifications are not mandatory and are subject to change without notice